Two Ram Baler Model TR-1052-100

       Revised: 6/06

HYDRAULIC

         Main Pumps                                  200 GPM Total Flow 3 pump System (Regen. System)

            System Pressure                     3500 PSI

            Main Cylinder                          10 In Bore x 120 In Stroke x 7 In Rod 

            Ejector Cylinder                  8 In Bore x 63 In Stroke x 5 In Rod

            Bale Door Cylinder             6 In Bore x 63 In Stroke x 3.5 In Rod

            Total Force                               137 Tons

            Ram Face Pressure                225 PSI

            Oil Reservoir                           480 Gallon Capacity

                                                                        L&P Wire-Tie or Accent Wire- Tire

ELECTRICAL

            Main Motor                                100 HP, 460 Volt, 3 Phase, TEFC, High Efficiency

            Cooler Pump Motor              10 HP, 460 Volt, 3 Phase

            Cooler Fan Motor                 2 HP, 460 Volt, 3 Phase

            Strapper Pump Motor          10 HP, 460 Volt, 3 Phase

            Controls                                     Programmable Controller with Diagnostics and Phone Modem

            Photocell                                   Infrared Type

STRUCTURAL

         Length Overall                      30 Ft - 2 In

            Hopper Opening                        80 In Long x 52 In Wide

            Charge Box Opening             72 In Long X 40 In Wide

            Width Overall                         16 Ft  - 0 In

            Charging Hopper Ht.            7 Ft  -  6 In

            Shear Blade                               Knife Steel, Reversible

            Liners                                             Hardox 400 or Equal  (Charging Box Totally lined w/wear plates)

            Shipping Weight                       26 Tons Approximate

PERFORMANCE

            Bale Size                                       45 In Wide x 30 In High x 62 In Length

            Bale Volume                              50 Cubic Feet Expanded (Approximate)

            Cycle Time                                  14 Seconds (no load - main cylinder only)

           

Material	Material PCF  Infeed Density	Bale Weight LB	Density  PCF Baled	Output Tons per Hr
*OCC	2.5 - 4	up to 1450	up to 28	up to 13
*News	6 - 8	up to 1600	up to 32	up to 20
*PET	.75 - 4	up to 1200	up to 24	up to 5
*UBC	1.5 - 4	up to 1000	up to 20	up to 8
*Misc. Aluminum	2 – 4	up to 1700	up to 34	up to 9
*Radiators (cu & al)	5 – 7	up to 2600	up to 52	up to 10
*Solid Waste	8 - 12	up to 2400	up to 48	up to 28

*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities,

Feed Rates, And Other Variables in Baling

 

STANDARD FEATURES                                          AVAILABLE OPTIONS

Programmable Controller with Phone Modem                  Oil Heater

Oil Cooler                                                                                      Conveyor Controls

Bale Door / Relief                                                                      Feed Hopper Extension with Upper Level Sensor

Across the Line Starting                                                     Contact Factory for other Options

 

Specifications and Design are Subject to Change if, in the opinion of the Manufacturer, the Change is an improvement.