Closed Door Horizontal
Model CD-851-30
Main Pumps 63 GPM Total Flow
System Pressure 3000 PSI
Main Cylinder 8 In Bore, 63 In Stroke, 5 In Rod
Door Cylinder 4 In Bore
Manifold Built In Relief Valve
Total Force 150,720 Lb
Ram Face Pressure 85 PSI
Oil Reservoir 200 Gallon Capacity
Filtration 10 Micron Return Line Filter
Main Motor 30 HP, 460 Volt, 3 Phase (Standard)
Controls All Control Circuits 120 Volts
Encolsure Nema 12 Rated
Photocell Infrared Type
Motor Type TEFC, High Efficiency, Across The Line Starting is
Standard
Length Overall 282 In
Width Frame 68 In
Charging Hopper Ht. 90 In
Hopper Opening 40 In Wide x 50 In Long
Shear Blade High Abrasion Resistant Alloy Plate
Shipping Weight 24,000 Lb Approximate
Platen Assembly Moves on High Abrasion Resistant Alloy Plate
Bottom of Platen is High Abrasion Resistant Alloy Plate
Bale Size 42 In Wide x 42 In High x 72 In Length
Bale Volume 73.5 Cubic Feet
Bale Weight 1650 - 2000 Lb of OCC
Bale Density 23 to 27 Lb Per Cubic Foot
Cycle Time 23 Seconds (No Load)
Five Wire-Tie Slots
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
Feed Hopper Extension with Upper Level Sensor
Conveyor Controls
Oil Cooler
Oil Heater
Bale Runout Table
Baling Wire