Closed Door Horizontal
Model CD-620-72
Main Pumps 42 GPM Total Flow
System Pressure 3000 PSI
Main Cylinder 6 In Bore, 43 In Stroke, 3½ In Rod
Door Cylinder 4 In Bore
Manifold Built In Relief Valve
Total Force 84,780 Lb
Ram Face Pressure 78 PSI
Oil Reservoir 125 Gallon Capacity
Filtration Suction Filter
Main Motor 20 HP, 230/460 Volt, 3 Phase (Standard)
Controls All Control Circuits 120 Volts
Photocell Infrared Type
Motor Type TEFC, High Efficiency, Across The Line Starting is
Length Overall 208 In
Width Frame 34.5 In
Charging Hopper Ht. 83 In
Hopper Opening 28 In Wide x 30 In Long
Breaker Bar 1.5 In
Shipping Weight 8,100 Lb Approximate
Platen Assembly Moves on High Abrasion Resistant Alloy Plate
Bottom of Platen is Long Wearing RyerTex
Bale Size 30 In Wide x 36 In High x 72 In Length
Bale Volume 45 Cubic Feet
Bale Weight 1000 - 1300 Lb (OCC)
Bale Density Up to 29 Lb Per Cubic Foot
Cycle Time 15 Seconds (No Load)
Five Wire-Tie Slots
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
Feed Hopper Extension with Upper Level Sensor
Oil Heater
Bale Runout Table
Baling Wire
Conveyor Controls