Auto-Tie Horizontal
Model AT-974-100
Revised: 6/2000
HYDRAULIC
Main Pumps 164 GPM Total Flow (Regen. system)
System Pressure 3000 PSI
Main Cylinder 9 In Bore, 94 In Stroke
Precompression Cylinder (2) 4 In Bore (Optional)
Tension Cylinder (6) 6 In Bore
Wire Inserter Cylinder 2 1/2 In Bore
Wire Twister Hydraulic Motor
Total Force 190,800 Lb
Ram Face Pressure 108 PSI
Oil Reservoir 400 Gallon Capacity
Filtration 10 Micron Replacement Element Filter
Auto-Tier (5) Five Wire Hydraulic Tier for up to 10 GA
Black Annealed Wire
ELECTRICAL
Main Motor 100 HP, 460 Volt, 3 Phase, TEFC, High Efficiency
Cooler Fan 1 HP, 460 Volt
Cooler Pump 5 HP, 460 Volt
Controls Programmable Controller with Phone Modem
Photocell Infrared Type
STRUCTURAL
Length Overall 39 Ft (with power pack located behind baler)
33 Ft (with power pack located beside baler)
Width Overall 14 Ft 10 In (at the tier station)
Charging Hopper Ht. 96 In (11 Ft 6 In with optional precompression Lid)
Charge Box Opening 40 In Wide x 72 In Long
Shear Blade T-1 Alloy Steel
Floor of Baler is Long Wearing T-1 Plate, Bottom of Platen is T-1 Plate
Shipping Weight 19 Tons Approximate
PERFORMANCE
Bale Size expanded 43 In Wide x 43 In High x Variable Length
Bale Volume @ 62 In Long 66.3 Cubic Feet Expanded (Approximate)
Cycle Time 11 Seconds (No Load)
Capacity 26,730 Cubic Feet per Hour (No Load)
|
Material |
Bale Weight LB |
Density LB Per Cubic Foot |
Loose Infeed Density Pound Per Cubic Foot |
Tons Per Hour @65% Loading Efficiency |
Tons Per Hour With Optional Lid |
|
High Grade Paper |
up to 1980 |
up to 30 |
Estimated 3.5 |
up to 25 |
up to 27 |
|
Conditioned News |
up to 1900 |
up to 29 |
Estimated 3.0 |
up to 20 |
up to 22 |
|
O.C.C. |
up to 1660 |
up to 25 |
Estimated 2.5 |
up to 17 |
up to 18 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
STANDARD FEATURES AVAILABLE OPTIONS
Programmable Controller with Model Oil Heater
Oil Cooler (air over oil) System Mid Tension System
Across the line Starting Precompression Lid
Bale Runout Table (6 Ft Long) Contact Factory for other Available Options