Auto-Tie Horizontal
Model AT-864-30
Revised: 04/03
HYDRAULIC
Main Pumps 63 GPM Total Flow (Regen System)
System Pressure 3000 PSI
Main Cylinder 8 In Bore, 82 In Stroke
Tension Cylinder 6 In Bore
Wire Inserter Cylinder 2 1/2 In Bore
Wire Twister Hydraulic Motor
Total Force 150,800 Lb
Ram Face Pressure 83 PSI
Oil Reservoir 200 Gallon Capacity
Filtration 10 Micron Replacement Element Filter
Auto-Tier (5) Five Wire Hydraulic Tier for up to 10 GA
Black Annealed Wire
ELECTRICAL
Main Motor 30 HP, 460 Volt, 3 Phase, TEFC, High Efficiency
Cooler Fan 1 HP, 460 Volt
Controls Programmable Controller with Phone Modem
Photocell Infrared Type
STRUCTURAL
Length Overall 31 Ft 8 In
Width Overall 14 Ft 10 In (at the tier station)
Charging Hopper Ht. 96 In
Charge Box Opening 41 In Wide x 60 In Long
Shear Blade High Abrasion Resistant Alloy Plate
Shipping Weight 15 Tons Approximate
PERFORMANCE
Bale Size expanded 43 In Wide x 43 In High x Variable Length
Bale Volume @ 62 In Long 66.3 Cubic Feet Expanded (Approximate)
Cycle Time 19 Seconds (No Load)
Capacity 14,200 Cubic Feet per Hour (No Load)
|
Material |
Bale Weight LB |
Density LB Per Cubic Foot |
Loose Infeed Density Pound Per Cubic Foot |
Tons Per Hour @65% Loading Efficiency |
|
High Grade Paper |
up to 1840 |
up to 28 |
Estimated 3.5 |
up to 14 |
|
Conditioned News |
up to 1780 |
up to 27 |
Estimated 3.0 |
up to 12 |
|
O.C.C. |
up to 1650 |
up to 25 |
Estimated 2.5 |
up to 10 |
|
O.C.C. open boxes |
up to 1650 |
up to 25 |
.5 |
up to 2.25 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
STANDARD FEATURES AVAILABLE OPTIONS
Programmable Controller with Modem Oil Heater
Oil Cooler (air over oil) System Factory Start Up
Across the Line Starting Conveyor Controls
Bale Runout Table (6 Ft Long) Contact Factory for other Available Options