Www.hjaint.com Solid Waste & Recycling Solutions

 Auto-Tie Horizontal

Model AT-824-50

Revised: 03/04

 

HYDRAULIC

            Main Pumps                                  105 GPM Total Flow (Regen System) 

            System Pressure                     3000 PSI

            Main Cylinder                          8 In Bore, 52 In Stroke, 5 In Rod

            Tension Cylinder                   6 In Bore

            Wire Inserter Cylinder    2 1/2 In Bore

            Wire Twister                             Hydraulic Motor

            Total Force                               150,720 Lb

            Ram Face Pressure                127 PSI

            Oil Reservoir                           300 Gallon Capacity

            Filtration                                  10 Micron Replacement Element Filter

            Auto-Tier                                     (5) Five Wire Hydraulic Tier for up to 10 GA

                                                                        Black Annealed Wire

ELECTRICAL

            Main Motor                                50 HP, 460 Volt, 3 Phase, TEFC, High Efficiency

            Cooler Fan                                 2 HP, 460 Volt

            Controls                                     Programmable Controller

            Photocell                                   Infrared Type

STRUCTURAL

         Length Overall                      292 in

            Width Overall                         160 In  (at the tier station)

            Charging Hopper Ht.            92 In

            Charge Box Opening             27 In Wide x 30 In Long

            Shear Bar                                    1 ½ In Breaker Bar 

            Platen Assembly Moves on High Abrasion Resistant Alloy Plate

            Bottom of Platen is High Resistant Alloy Plate

            The Replaceable Liners are plug welded to the baler and can be replaced as needed         

            Shipping Weight                       16 Tons Approximate        

PERFORMANCE

            Bale Size                                       29 In Wide x 43 In High x Variable Length

            Bale Volume @ 80 In Long  57.7 Cubic Feet Expanded (Approximate)

            Cycle Time                                  9 Seconds (No Load)

            Capacity                                      11,000 Cubic Feet per Hour (No Load)

 

Material	Bale Weight LB	Density LB Per Cubic Foot	Loose Infeed Density Pound Per Cubic Foot	Tons Per Hour @65% Loading Efficiency
Shredded OCC	up to 1670	up to 29	Estimated 2.0	up to 7
Shredded News	up to 1730	up to 30	Estimated 1.0	up to 3.5
Shredded High Grades	up to 1850	up to 32	Estimated 1.5	up to 5.4

*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities,

Feed Rates, And Other Variables in Baling

 

STANDARD FEATURES                          AVAILABLE OPTIONS

Programmable Controller                               Oil Heater

Oil Cooler (air over oil) System                                   Feed Hopper Extension

Across the Line Starting                                                     Contact Factory for other Available Options

                                                                                                                                                                   

Specifications and Design are Subject to Change if, in the opinion of the Manufacturer, the Change is an improvement.