Auto-Tie Baler with Hinged Sidewall
Model AT-754-HS-30
Revised: 12/05
Main Pumps 63 GPM Total Flow (Regen. System)
System Pressure 3000 PSI
Main Cylinder 7 In Bore
Hinge Side Cylinder 5 In Bore
Tension Cylinder 6 In Bore
Total Force 115,400 Lb - 80 Tons
Ram Face Pressure 93 PSI
Oil Reservoir 200 Gallon Capacity
Filtration 10 Micron Replacement Element Filter
Main Motor 30 HP, 460 Volt, 3 Phase, TEFC, High Efficiency
Cooler Fan 2 HP, 460 Volt
Controls Programmable Controller
Photocell Infrared Type
Hopper Opening 66 In Wide x 50 In Long
Charge Box Opening 54 In Wide x 50 In Long
Length Overall 30 Ft (Frame only)
Width Overall 13 Ft 4 In (at the tier station)
Height Overall 123 In (Height of Charge Hopper)
Shear Blade T-1 Alloy Steel
Floor of Baler Long Wearing T-1 Plate, Bottom of Platen is T-1 Plate
Shipping Weight 14 Tons Approximate
Bale Size expanded 30 In Wide x 45 In High x Variable Length
Bale Volume @ 62 In Long 48.4 Cubic Feet Expanded (Approximate)
Cycle Time 30 Seconds (No Load)
Capacity 6,480 Cubic Feet per Hour (No Load)
|
Material |
Bale Weight LB |
Density LB Per Cubic Foot |
Loose Infeed Density Pound Per Cubic Foot |
Tons Per Hour @65% Loading Efficiency |
|
High Grade Paper |
up to 1550 |
up to 32 |
Estimated 4.0 |
up to 8 |
|
News |
up to 1400 |
up to 29 |
Estimated 3.5 |
up to 7 |
|
O.C.C. |
up to 1300 |
up to 27 |
Estimated 2.5 |
up to 5 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities,
Feed Rates, And Other Variables in Baling
Standard Features Available Options
Programmable Controller Oil Heater
Oil Cooler Conveyor Controls
Bale Runout Table (10 ft long) Contact Factory for other Available Options