Auto-Tie Horizontal
Model AT-752-20R
Revised: 04/03
HYDRAULIC
Main Pumps 42 GPM Total Flow (Regen System)
System Pressure 3000 PSI
Main Cylinder 7 In Bore, 74 In Stroke, 4 In Rod
Tension Cylinder 6 In Bore
Wire Inserter Cylinder 2 1/2 In Bore
Wire Twister Hydraulic Motor
Total Force 115,400 Lb
Ram Face Pressure 63 PSI
Oil Reservoir 125 Gallon Capacity
Filtration 10 Micron Replacement Element Filter
Auto-Tier (5) Five Wire Hydraulic Tier for up to 10 GA
Black Annealed Wire
ELECTRICAL
Main Motor 20 HP, 460 Volt, 3 Phase, TEFC, High Efficiency
Oil Cooler 1 HP, 460 Volt, 3 Phase
Controls Programmable Controller
Photocell Infrared Type
STRUCTURAL
Length Overall 29 Ft 8 In
Width Overall 14 Ft 10 In (at the tier station)
Charging Hopper Ht. 96 In
Charge Box Opening 41 In Wide x 50 In Long
Shear Blade High Abrasion Resistant Alloy Plate
Shipping Weight 12 Tons Approximate
PERFORMANCE
Bale Size expanded 43 In Wide x 43 In High x Variable Length
Bale Volume @ 62 In Long 66.3 Cubic Feet Expanded (Approximate)
Cycle Time 20 Seconds (No Load)
Capacity 11,400 Cubic Feet per Hour (No Load)
|
Material |
Bale Weight LB |
Density LB Per Cubic Foot |
Loose Infeed Density Pound Per Cubic Foot |
Tons Per Hour @65% Loading Efficiency |
|
High Grade Paper |
up to 1650 |
up to 25 |
Estimated 3.5 |
up to 12 |
|
Conditioned News |
up to 1600 |
up to 24 |
Estimated 3.0 |
up to 10 |
|
OCC |
up to 1525 |
up to 23 |
Estimated 2.5 |
up to 9 |
|
OCC Open Boxes |
up to 1450 |
up to 22 |
.5 |
up to 1.8 |
*Performance Rates, Bale Weights, and Bale Densities Are Subject to Moisture Content, Material Pre-Bale Densities, Feed Rates, And Other Variables in Baling
STANDARD FEATURES AVAILABLE OPTIONS
Programmable Controller Oil Heater and Oil Cooler
Hopper Access Door w/Safety Interlock Factory Start Up
Across the Line Starting Conveyor Controls
Bale Runout Table (6 Ft Long) Contact Factory for other Available Options